OpenVPN Connected but no internet

abskillzabskillz
in Technical

Hi,

I have recently bough VPS from @Abdullah (webhorizon.in)

Earlier I was using dedicated VPS for openvpn. Now I am switched to NAT VPS. The problem is when I am connecting to OpenVPN through mobile or desktop app. It is connecting to VPN but no internet is working. I am not expert in VPS so need help!

Please let me know if any screenshot or log to be shown here.

Tagged:

Comments

  • elliotcelliotc OG

    You install openvpn the script way or manually?

    Action and Reaction in history

  • abskillzabskillz

    @elliotc said:
    You install openvpn the script way or manually?

    the script way by this commnad: wget https://git.io/vpn -O openvpn-install.sh && bash openvpn-install.sh

  • saibalsaibal OG

    Do you have iptables installed on your VPS? If so, you may need to add these lines to your config:

    iptables -t nat -A POSTROUTING -s 10.0.0.0/8 -o eth0 -j MASQUERADE
iptables -t nat -A PREROUTING -p tcp -i eth0 -d $eth0_addr --dport 80 -j DNAT --to 10.8.0.3

    Substitute with your IP and interface names.

  • ehabehab Content Writer

    @abskillz when you buy from @Abdullah there is no internet -- u don't need it.

  • abskillzabskillz

    @saibal said:
    Do you have iptables installed on your VPS? If so, you may need to add these lines to your config:

    iptables -t nat -A POSTROUTING -s 10.0.0.0/8 -o eth0 -j MASQUERADE
iptables -t nat -A PREROUTING -p tcp -i eth0 -d $eth0_addr --dport 80 -j DNAT --to 10.8.0.3

    Substitute with your IP and interface names.

    hi, can you please elaborate further more? Where I have to put IP and interface name? and Which IP IPV4 or internal IP ?

  • abskillzabskillz

    @ehab said:
    @abskillz when you buy from @Abdullah there is no internet -- u don't need it.

    Hi, I just bought while ago. I don't know why no internet maybe I am doing some mistake in configuaration.

  • elliotcelliotc OG

    Have you enabled Tun? Which port you are using?

    Action and Reaction in history

  • abskillzabskillz

    @elliotc said:
    Have you enabled Tun? Which port you are using?

    Yes, tun is enabel. For the port I am using from my given 20 ports. Like my internal IP is ending with 180 so I am using 18005 for OpenVPN

  • ehabehab Content Writer

    @abskillz said:

    i was fooling around, i am sure he will help you if he has time. so open a ticket,.

  • kudukukuduku

    @abskillz said:

    @elliotc said:
    Have you enabled Tun? Which port you are using?

    Yes, tun is enabel. For the port I am using from my given 20 ports. Like my internal IP is ending with 180 so I am using 18005 for OpenVPN

    But why are you using OpenVPN instead of wireguard which is faster than OpenVPN
    @Abdullah had linked both in his thread
    OpenVPN: https://github.com/Nyr/openvpn-install
    Wireguard: https://github.com/Nyr/wireguard-install

    Both scripts are well proofed , why not use them ?
    there is no problem in NATs as i am also using them at 2 locations . No issues faced

  • abskillzabskillz

    @kuduku said:

    @abskillz said:

    @elliotc said:
    Have you enabled Tun? Which port you are using?

    Yes, tun is enabel. For the port I am using from my given 20 ports. Like my internal IP is ending with 180 so I am using 18005 for OpenVPN

    But why are you using OpenVPN instead of wireguard which is faster than OpenVPN
    @Abdullah had linked both in his thread
    OpenVPN: https://github.com/Nyr/openvpn-install
    Wireguard: https://github.com/Nyr/wireguard-install

    Both scripts are well proofed , why not use them ?
    there is no problem in NATs as i am also using them at 2 locations . No issues faced

    I installed wireguard also now, but same issue connected but no internet.

  • kudukukuduku

    @abskillz said:

    @kuduku said:

    @abskillz said:

    @elliotc said:
    Have you enabled Tun? Which port you are using?

    Yes, tun is enabel. For the port I am using from my given 20 ports. Like my internal IP is ending with 180 so I am using 18005 for OpenVPN

    But why are you using OpenVPN instead of wireguard which is faster than OpenVPN
    @Abdullah had linked both in his thread
    OpenVPN: https://github.com/Nyr/openvpn-install
    Wireguard: https://github.com/Nyr/wireguard-install

    Both scripts are well proofed , why not use them ?
    there is no problem in NATs as i am also using them at 2 locations . No issues faced

    I installed wireguard also now, but same issue connected but no internet.

    Are you using your allotted ports ?

  • isunbejoisunbejo OG

    have you activated forwader on kernel ?

    sysctl -w net.ipv4.ip_forward=1
    Thanked by (1)ehab
  • abskillzabskillz

    @kuduku said:

    @abskillz said:

    @kuduku said:

    @abskillz said:

    @elliotc said:
    Have you enabled Tun? Which port you are using?

    Yes, tun is enabel. For the port I am using from my given 20 ports. Like my internal IP is ending with 180 so I am using 18005 for OpenVPN

    But why are you using OpenVPN instead of wireguard which is faster than OpenVPN
    @Abdullah had linked both in his thread
    OpenVPN: https://github.com/Nyr/openvpn-install
    Wireguard: https://github.com/Nyr/wireguard-install

    Both scripts are well proofed , why not use them ?
    there is no problem in NATs as i am also using them at 2 locations . No issues faced

    I installed wireguard also now, but same issue connected but no internet.

    Are you using your allotted ports ?

    Yes, as I told you my internal IP ending with 180 so I am using 18001-18020 port

  • abskillzabskillz

    @isunbejo said:
    have you activated forwader on kernel ?

    sysctl -w net.ipv4.ip_forward=1

    Hi, did the same but not working :-)

  • dosaidosai OG
    edited March 2021

    Check your client.conf it should look like below,

    [Peer]
AllowedIPs = 0.0.0.0/0, ::/0
Endpoint = YOUR_NAT_IPV4:CUSTOM_PORT
  • xowxenxirixxowxenxirix

    Could be your ISP. Try using v2ray. It works even if your ISP is blocking VPN traffic.

  • atthatth

    If you are sure that the vpn is connected successfully (able to ping the server over the vpn) just no internet access, then sounds like iptables not set up correctly.

    I also bought a NAT VPS from @Abdullah recently and both of @Nyr scripts worked flawlessly for me. Did you use those or some other way? If you haven't tried those already I highly recommend reinstalling fresh using those scripts instead. Takes away a lot of the iptables/routing config issues that I used to struggle with in the past.

    OpenVPN: https://github.com/Nyr/openvpn-install
    Wireguard: https://github.com/Nyr/wireguard-install

    Both scripts are well proofed , why not use them ?

  • YmpkerYmpker OGContent Writer

    I don't know why but I had this issue once, too. It had to do with which DNS I selected during Nyr's setup. I think only system resolvers option worked for me. Try this and/or change your end user device's DNS manually to Google DNS or Quad9/CF..

    Ympker's Shared/Reseller Hosting Comparison Chart, Ympker's VPN LTD Comparison, Uptime.is, Ympker's GitHub.

  • DevasDevas

    @abskillz said: It is connecting to VPN but no internet is working.

    You are missing NAT rules in iptables/nftables.

Sign In or Register to comment.

© LowEndSpirit 2024

ipv6 ready

This Site is currently in maintenance mode.
Please check back here later.

→ Site Settings