inceptionhosting does not work iptables

I use vps as a proxy. in the iptables settings is blocking some sites. before the openVZ update, everything worked well on the old version. but it’s not working now.

I am using this command:
iptables -A OUTPUT -m string --string "vk.com" --algo kmp --to 65535 -p all -j REJECT

everything worked on the old version but now displays an error message:
iptables: No chain/target/match by that name.

How to fix it?


My Node: Mininode1b (NETHERLANDS)
My IP: 192.168.1.101

«1

Comments

  • kokkezkokkez OG
    edited January 2020

    I think you need to write this in a shell:
    touch /option.netfilter

    It will take up to 30 minutes, your server will restart.
    When it has been done, the file option.netfilter will be renamed to netfilter.enabled

    You can view a similar process, once logged in into the clientarea:
    https://clients.inceptionhosting.com/index.php?rp=/knowledgebase/26/Enable-FUSE-or-NFS.html

  • @kokkez said:
    I think you need to write this in a shell:
    touch /option.netfilter

    I checked, it does not work. the result is the same - there is an error.
    maybe something else is needed?

  • I've never done --string matches. Does the rest of the config work if you remove those? If you just do a simple iptables --list what do you see?

  • @skorous said:
    I've never done --string matches. Does the rest of the config work if you remove those? If you just do a simple iptables --list what do you see?

    all words in a line are required; you cannot delete a single word (cannot delete parameter -m string).
    for iptables --list I see other rules, they work. only the module does not work -m string
    before the update everything worked, now it doesn’t work

  • skorousskorous OG
    edited January 2020

    Ah, so iptables as a whole does work. Just the string matching doesn't. ( Edited: because I didn't read the whole post )

  • Just so the question has been asked, this is the same OS just migrated over to the new OVZ7 node or were you re-provisioned?

  • @skorous said:
    Just so the question has been asked, this is the same OS just migrated over to the new OVZ7 node or were you re-provisioned?

    all the same, nothing has changed. just changed OpenVZ and I did a system update (apt update; apt upgrade).

  • ClouviderClouvider Hosting ProviderOG

    Presumably module not loaded in the kernel. It’s not quite basic one either. One that’s quite taxing as well. Perhaps @AnthonySmith will oblige and load, otherwise you shouldn’t have any hard feelings here.

    Thanked by (1)skorous
  • WSSWSS Retired

    That used to be xt_string but I haven't played with OVZ7 much.. nor used strings fro this.

    My pronouns are asshole/asshole/asshole. I will give you the same courtesy.

  • InceptionHostingInceptionHosting Hosting ProviderOG

    I will have a look into what is missing tomorrow.

    https://inceptionhosting.com
    Please do not use the PM system here for Inception Hosting support issues.

  • InceptionHostingInceptionHosting Hosting ProviderOG

    Ok had a look, it is still xt_string which is loaded on the host node.

    Did some reading, not much new info available but it looks like this used to be a common issue on vz6 too, unloading xt_string and then reloading it via probing for ipt_string was the suggested solution.

    I have now done that and can see that xt_string is present.

    I would suggest that you stop your container completely via solusvm then start it via solusvm.

    check again and throw a -v after iptables in the command and paste the results if it is still failing, it is quite possible the module is not the issue here.

    https://inceptionhosting.com
    Please do not use the PM system here for Inception Hosting support issues.

  • @AnthonySmith said:
    Ok had a look, it is still xt_string which is loaded on the host node.

    through the solusvm menu I turned on and off VPS.
    I see the module "string" in the file /proc/net/ip_tables_matches

    but the firewall is not working:
    # iptables -v -A OUTPUT -m string --string "vk.com" --algo kmp --to 65535 -p all -j REJECT
    REJECT all opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 STRING match "vk.com" ALGO name kmp TO 65535 reject-with icmp-port-unreachable
    iptables: No chain/target/match by that name.

  • InceptionHostingInceptionHosting Hosting ProviderOG

    Not sure what to tell you, the module is loaded and available, I will take another look though.

    https://inceptionhosting.com
    Please do not use the PM system here for Inception Hosting support issues.

  • Is that iptable real iptable, or nftable emulating it? Default is nft translation layer, right?

  • @abnoeh said:
    Is that iptable real iptable, or nftable emulating it? Default is nft translation layer, right?

    I have not used anywhere nftable, use only iptable. maybe OVZ7 replaces, but I'm not sure

  • @AnthonySmith said:
    Not sure what to tell you, the module is loaded and available, I will take another look though.

    you may need to update openvz, there are no problems with the latest version. I don't have the last one. can you update openvz?
    https://bugs.openvz.org/browse/OVZ-7171

  • InceptionHostingInceptionHosting Hosting ProviderOG

    There you go then, options right now:

    Use a CentOS 7 container or wait for the next update/reboot.

    https://inceptionhosting.com
    Please do not use the PM system here for Inception Hosting support issues.

  • @AnthonySmith said:
    wait for the next update/reboot.

    OK. tell me when the planned next upgrade?

  • InceptionHostingInceptionHosting Hosting ProviderOG

    @Andr_C said:

    @AnthonySmith said:
    wait for the next update/reboot.

    OK. tell me when the planned next upgrade?

    There are none planned right now.

    https://inceptionhosting.com
    Please do not use the PM system here for Inception Hosting support issues.

  • edited January 2020

    @AnthonySmith said: There are none planned right now.

    tell me at least approximate dates (six months or a year).

  • InceptionHostingInceptionHosting Hosting ProviderOG

    @Andr_C said:

    @AnthonySmith said: There are none planned right now.

    tell me at least approximate dates (six months or a year).

    about that, maybe sooner.

    https://inceptionhosting.com
    Please do not use the PM system here for Inception Hosting support issues.

  • WSSWSS Retired

    @AnthonySmith said:

    @Andr_C said:

    @AnthonySmith said: There are none planned right now.

    tell me at least approximate dates (six months or a year).

    about that, maybe sooner.

    I'd just pay $5/mo for KernelCare and let it roll.

    My pronouns are asshole/asshole/asshole. I will give you the same courtesy.

  • @WSS said:

    @AnthonySmith said:

    @Andr_C said:

    @AnthonySmith said: There are none planned right now.

    tell me at least approximate dates (six months or a year).

    about that, maybe sooner.

    I'd just pay $5/mo for KernelCare and let it roll.

    Just curious: is KernelCare available for the OpenVZ kernel?

    "A single swap file or partition may be up to 128 MB in size. [...] [I]f you need 256 MB of swap, you can create two 128-MB swap partitions." (M. Welsh & L. Kaufman, Running Linux, 2e, 1996, p. 49)

  • @angstrom said:

    @WSS said:

    @AnthonySmith said:

    @Andr_C said:

    @AnthonySmith said: There are none planned right now.

    tell me at least approximate dates (six months or a year).

    about that, maybe sooner.

    I'd just pay $5/mo for KernelCare and let it roll.

    Just curious: is KernelCare available for the OpenVZ kernel?

    Yes INDEED it is, APPARENTLY.

  • @Neoon said:

    @angstrom said:

    @WSS said:

    @AnthonySmith said:

    @Andr_C said:

    @AnthonySmith said: There are none planned right now.

    tell me at least approximate dates (six months or a year).

    about that, maybe sooner.

    I'd just pay $5/mo for KernelCare and let it roll.

    Just curious: is KernelCare available for the OpenVZ kernel?

    Yes INDEED it is, APPARENTLY.

    Why "apparently"? Do you have a reference? (It's a sincere question.)

    "A single swap file or partition may be up to 128 MB in size. [...] [I]f you need 256 MB of swap, you can create two 128-MB swap partitions." (M. Welsh & L. Kaufman, Running Linux, 2e, 1996, p. 49)

  • @angstrom said:

    @Neoon said:

    @angstrom said:

    @WSS said:

    @AnthonySmith said:

    @Andr_C said:

    @AnthonySmith said: There are none planned right now.

    tell me at least approximate dates (six months or a year).

    about that, maybe sooner.

    I'd just pay $5/mo for KernelCare and let it roll.

    Just curious: is KernelCare available for the OpenVZ kernel?

    Yes INDEED it is, APPARENTLY.

    Why "apparently"? Do you have a reference? (It's a sincere question.)

    Thanked by (1)angstrom
  • @angstrom said: is KernelCare available for the OpenVZ kernel?

    Indeed it is, even for legacy OpenVZ6:

    You can see a full list of supported kernels here: https://patches.kernelcare.com/

    Thanked by (1)angstrom
  • @sonic, @Daniel

    Thanks. Yes, I was aware of OVZ6 support. I was interested in whether KernelCare supports the OVZ7 kernel. Perhaps I should have clarified this, but the topic of this thread is OVZ7.

    I'm still wondering, though: I can't seem to find the OVZ7 kernel on https://patches.kernelcare.com/#All Kernels/ . But perhaps I'm missing something.

    "A single swap file or partition may be up to 128 MB in size. [...] [I]f you need 256 MB of swap, you can create two 128-MB swap partitions." (M. Welsh & L. Kaufman, Running Linux, 2e, 1996, p. 49)

  • InceptionHostingInceptionHosting Hosting ProviderOG

    3 points.

    1. I don’t believe Kcare supports virtuozzo kernels.
    2. I removed Kcare from all of the vz6 nodes due to stability issues.
    3. Out of all of the containers on the NAT OpenVZ service (thousands) this is a single lone report, with a ‘should fix’ and work around in the bug report so I can’t justify a full node reboot just for that, you pick OpenVZ and you accept some limitations.

    That said, frankly OpenVZ 7 is not that stable generally yet, I mean it’s ok but it’s about at the stage of 80% that both VZ5 and VZ6 were at this stage in their life, so a reboot may be inevitable way sooner, the updates (with no guarantee of a fix) have been applied in advance should that happen.

    Thanked by (1)angstrom

    https://inceptionhosting.com
    Please do not use the PM system here for Inception Hosting support issues.

  • @AnthonySmith said: reboot may be inevitable way sooner, the updates

    I will wait for the update and reboot of the new kernel. it can wait. there is a problem, but it is not very big.
    the problem can be closed I am waiting for an update.

Sign In or Register to comment.

This Site is currently in maintenance mode.
Please check back here later.

→ Site Settings