For Trade VPS Mouse 500GB - Servarica

Hello folks,

I'm finally back after lots of work during corona times. Hope you're all healthy and good to see the old faces are still active @Not_Oles @Iroshan464 @AnthonySmith.

Today I started my New Years resolution: less (idling) servers :-)

So here is my first offer for transfer from Servarica, blackfriday sales.

"VPS Mouse"
1 CPU cores shared
1GB RAM
500gb disk
100mbps with 2TB limit
/64 IPv6 included
12$/year
Located in Canada, Montreal

I would happy if someone has a use for it :-)
Dave

And some benches for anyone interested.

  1. nench

nench.sh v2019.07.20 -- https://git.io/nench.sh

benchmark timestamp: 2020-08-02 12:48:26 UTC

Processor: Intel(R) Xeon(R) CPU X5670 @ 2.93GHz
CPU cores: 1
Frequency: 2933.428 MHz
RAM: 974M
Swap: 190M
Kernel: Linux 4.9.0-8-amd64 x86_64

Disks:
xvda 500G SSD

CPU: SHA256-hashing 500 MB
CPU: bzip2-compressing 500 MB
CPU: AES-encrypting 500 MB

ioping: seek rate
min/avg/max/mdev = 231.9 us / 463.0 us / 8.04 ms / 395.6 us
ioping: sequential read speed
generated 4.26 k requests in 5.00 s, 1.04 GiB, 851 iops, 212.8 MiB/s

dd: sequential write speed
1st run: 112.53 MiB/s
2nd run: 253.68 MiB/s
3rd run: 248.91 MiB/s
average: 205.04 MiB/s

No IPv4 connectivity detected

IPv6 speedtests
your IPv6: 2602:ffd5:1:xxxx

Leaseweb (NL):        7.58 MiB/s
Softlayer DAL (US):   9.34 MiB/s
Online.net (FR):      6.13 MiB/s

OVH BHS (CA): 11.35 MiB/s

  1. yabs

## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##

Yet-Another-Bench-Script

v2020-06-20

https://github.com/masonr/yet-another-bench-script

## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##

Sun Aug 2 08:54:11 EDT 2020

Basic System Information:

Processor : Intel(R) Xeon(R) CPU X5670 @ 2.93GHz
CPU cores : 1 @ 2933.428 MHz
AES-NI : ❌ Disabled
VM-x/AMD-V : ❌ Disabled
RAM : 974M
Swap : 190M
Disk : 492G

fio Disk Speed Tests (Mixed R/W 50/50):

Block Size 4k (IOPS) 64k (IOPS)
Read 25.14 MB/s (6.2k) 123.13 MB/s (1.9k)
Write 25.16 MB/s (6.2k) 123.78 MB/s (1.9k)
Total 50.31 MB/s (12.5k) 246.92 MB/s (3.8k)
Block Size 512k (IOPS) 1m (IOPS)
------ --- ---- ---- ----
Read 169.28 MB/s (330) 174.66 MB/s (170)
Write 178.27 MB/s (348) 186.29 MB/s (181)
Total 347.55 MB/s (678) 360.95 MB/s (351)

iperf3 Network Speed Tests (IPv6):

Provider | Location (Link) | Send Speed | Recv Speed
| | |
Bouygues Telecom | Paris, FR (10G) | 93.9 Mbits/sec | 58.7 Mbits/sec
Online.net | Paris, FR (10G) | 89.4 Mbits/sec | 94.2 Mbits/sec
WorldStream | The Netherlands (10G) | 95.0 Mbits/sec | 86.1 Mbits/sec
wilhelm.tel | Hamburg, DE (10G) | 92.9 Mbits/sec | 93.9 Mbits/sec
Airstream Comms | Eau Claire, WI, US (10G) | 98.7 Mbits/sec | 95.7 Mbits/sec
Hurricane Electric | Fremont, CA, US (10G) | 97.1 Mbits/sec | 95.0 Mbits/sec

SoftwareArchitect, Projectmanager, Founder, Innovator and passionate admin in my free time.

Thanked by (1)Ganonk
«1

Comments

  • Hi @David! Nice to see you! Greetings from Mexico! No need for the server here, but it looks like a good deal. Hope someone will take it! :)

    Tom. 穆坦然. Not Oles. Happy New York City guy visiting Mexico! How is your 文言文?
    The MetalVPS.com website runs very speedily on MicroLXC.net! Thanks to @Neoon!

  • Hi @Not_Oles ! Yeah it's quite good for the bucks it costs. I intended on having it as a offsite backup but ipv6 only made it never work for me :smile:

    SoftwareArchitect, Projectmanager, Founder, Innovator and passionate admin in my free time.

  • IPv6 only? Without IPv4 NAT? This would be great for me for backups, but with IPv6 I may just not be able to use it on some VPS. Anyway, how much do you want in the VPS?

    Thanked by (1)david
  • @alvaro Yeah sadly this deal was ipv6-only. You can use a ipv4 NAT tho but I got too busy so I haven't touched this server since I bought it last year :sweat_smile:

    Basicly I don't want anything for it, except the transfer fee (if there is any @servarica_hani ?) and maybe a little donation. Since I would cancel it anyways I think it would be good if someone else has a use for it :smile:

    SoftwareArchitect, Projectmanager, Founder, Innovator and passionate admin in my free time.

  • I also have one and used it as nextcloud. Performance is good for the price.

    Thanked by (1)david

    A simple uptime dashboard using UptimeRobot API https://upy.duo.ovh
    Currently using VPS from BuyVM, GreenCloudVPS, Gullo's, Hetzner, HostHatch, InceptionHosting, LetBox, MaxKVM, MrVM, VirMach.

  • @chocolateshirt Yeah it's awesome. For my work I sadly need to store all data in Germany or at least EU (thanks to EU and GDPR).

    SoftwareArchitect, Projectmanager, Founder, Innovator and passionate admin in my free time.

  • VPNVPN OG
    edited August 2020

    @david - I shall take it. Sent you a message.

  • ehabehab Content Writer

    @david , i advise you to keep it... you will not find ever that disk size/price again.

  • @ehab Yeah that's right. But I have way too many VPS unused :sweat_smile: I also got another host solutions 1TB for 16$/year I don't use. If it would have ipv4 it would be a no brainer.

    SoftwareArchitect, Projectmanager, Founder, Innovator and passionate admin in my free time.

  • ehabehab Content Writer

    just think about 500GB redundancy. as far as i know the host solutions is a secondary backup because of frequent datacenter issues in last years.

    well, you know what is right for you and hopefully it will find a new owner "lucky".

    Thanked by (1)david
  • Yeah I considered as as backup storage but I would need to fully encrypt everything on there to suit the european data security laws. The list of vps I got which are only idling is too long but I guess that's why we all met here right? :grin:

    SoftwareArchitect, Projectmanager, Founder, Innovator and passionate admin in my free time.

  • I will join the queue if @VPN does not take it for some reason. Now that my ISP is fully supporting IPv6 it would be great.

  • Foxo would happily take it :)

  • Hey guys, so far no update from @servarica_hani on how we actually can transfer it. For other providers I know and have done it before but for servarica I got no experience yet. If someone of you knows the procedure I would be grateful :smile:

    SoftwareArchitect, Projectmanager, Founder, Innovator and passionate admin in my free time.

  • Last Active here on May 28

    You might wanna open a ticket with them on this one.

    @foxone said:
    Foxo would happily take it :)

    @david Who could say no to those (puppy) eyes ?

  • My ISP does not support ipv6.. so how can I connect to ipv6 only server like this? Use windows laptop.. thanks

  • RahulRahul OG
    edited August 2020

    @localhost said:
    My ISP does not support ipv6.. so how can I connect to ipv6 only server like this? Use windows laptop.. thanks

    Use a IPv6 tunnel broker or VPN via a cheap yearly LES box ?

  • @Rahul said:

    @localhost said:
    My ISP does not support ipv6.. so how can I connect to ipv6 only server like this? Use windows laptop.. thanks

    Use a IPv6 tunnel broker or VPN via a cheap yearly LES box ?

    I tried he tunnel broker but it doesn't seem to work on windows... I have a idling vps with ipv4 and ipv6 support... so how do you recommend I can use it to connect to this vps? Any tutorial or guide is helpful. Tia

  • @localhost said:

    @Rahul said:

    @localhost said:
    My ISP does not support ipv6.. so how can I connect to ipv6 only server like this? Use windows laptop.. thanks

    Use a IPv6 tunnel broker or VPN via a cheap yearly LES box ?

    I tried he tunnel broker but it doesn't seem to work on windows... I have a idling vps with ipv4 and ipv6 support... so how do you recommend I can use it to connect to this vps? Any tutorial or guide is helpful. Tia

    Wireguard is the simplest one, just use installer script like https://github.com/Nyr/wireguard-install on your dual stack IP idling VPS

    A simple uptime dashboard using UptimeRobot API https://upy.duo.ovh
    Currently using VPS from BuyVM, GreenCloudVPS, Gullo's, Hetzner, HostHatch, InceptionHosting, LetBox, MaxKVM, MrVM, VirMach.

  • Servarica (@servarica_hani ) has a weird procedure of service transfer. It requires both the giver and receiver to order some product and not pay for it, in order to pass abuse/fraud checks. It does not matter if both giver and receiver are active customers, with active services in accounts, which successfully passed the fraud checks in the past, they still have to do this. Anyway, I complied, everything seems good, but still no transfer after 2 days.

    @david - any issues on your side?

  • @VPN They wrote me the server was successfully transferred. Have fun my friend!

    For the others I'm still consolidating my servers, I'll probably got more for transfer :sweat_smile:

    SoftwareArchitect, Projectmanager, Founder, Innovator and passionate admin in my free time.

  • @david said:
    @VPN They wrote me the server was successfully transferred. Have fun my friend!

    For the others I'm still consolidating my servers, I'll probably got more for transfer :sweat_smile:

    How many mouse left?

    A simple uptime dashboard using UptimeRobot API https://upy.duo.ovh
    Currently using VPS from BuyVM, GreenCloudVPS, Gullo's, Hetzner, HostHatch, InceptionHosting, LetBox, MaxKVM, MrVM, VirMach.

  • @chocolateshirt said:

    @david said:
    @VPN They wrote me the server was successfully transferred. Have fun my friend!

    For the others I'm still consolidating my servers, I'll probably got more for transfer :sweat_smile:

    How many mouse left?

    No mouse left but other vps. something special you're interested in?

    SoftwareArchitect, Projectmanager, Founder, Innovator and passionate admin in my free time.

  • _MS__MS_ OG
    edited August 2020

    @david said:
    @VPN They wrote me the server was successfully transferred. Have fun my friend!

    For the others I'm still consolidating my servers, I'll probably got more for transfer :sweat_smile:

    You should list all the remaining ones too when they're ready for transfer.

  • @david said:

    @chocolateshirt said:

    @david said:
    @VPN They wrote me the server was successfully transferred. Have fun my friend!

    For the others I'm still consolidating my servers, I'll probably got more for transfer :sweat_smile:

    How many mouse left?

    No mouse left but other vps. something special you're interested in?

    I am looking for HostHatch 1TB or 250GB storage VPSes

    A simple uptime dashboard using UptimeRobot API https://upy.duo.ovh
    Currently using VPS from BuyVM, GreenCloudVPS, Gullo's, Hetzner, HostHatch, InceptionHosting, LetBox, MaxKVM, MrVM, VirMach.

  • MS said:

    @david said:
    @VPN They wrote me the server was successfully transferred. Have fun my friend!

    For the others I'm still consolidating my servers, I'll probably got more for transfer :sweat_smile:

    You should list all the remaining ones too when they're ready for transfer.

    Yeah good idea. So far it probably will be a 1 TB storage server at hostsolutions and a couple of Netcup VPS 200 (discounted for 1,69€/month).
    But I'm looking for some new storage vps, preferable in Germany or Europe because of GDPR :smile:

    So far my ideas where nexusbytes or inceptionhosting, any other ideas?

    Thanked by (1)bdl

    SoftwareArchitect, Projectmanager, Founder, Innovator and passionate admin in my free time.

  • Netcup is in Germany, so it's under GDPR. HostSolutions is in Romania, also under GDPR. I guess you run away from Trump's new firewall and monitoring system?

  • @david said:
    So far my ideas where nexusbytes or inceptionhosting, any other ideas?

    LiteServer.nl are highly regarded.

  • @david simply list what you have and what you would like in return (whether is specific money, whatever donation, or some other offer to swap).

    Meanwhile, thank you.

  • MS said:

    @david said:
    So far my ideas where nexusbytes or inceptionhosting, any other ideas?

    LiteServer.nl are highly regarded.

    I second this. Used one of their storage boxes for ~2 years, never had any problems.

Sign In or Register to comment.

This Site is currently in maintenance mode.
Please check back here later.

→ Site Settings