statibus | Minimalistic Status Page

Neoon · January 2021

Well, I needed a self hosted status page, without any bloat, it needs to be fast and easy to deploy.
Supports Ping, Port and HTTP checks with custom http codes + 60s or 30s check intervals.

It does run on rqlite instead of MySQL, which is basically sqlite but with a shiton of neat features.
You can find it here: https://github.com/rqlite/rqlite

Here is a demo: https://statibus.x8e.net
Here is the code: https://github.com/Ne00n/statibus

May you give me some feedback.
Amen.

Ganonk · January 2021

آمين

Brueggus · January 2021

@Neoon said:
May you give me some feedback.

I haven't tried it myself yet (obviously), but I already have tears of joy in my eyes because of...

Handmade css, no framework, about 2kb
Zero Javascript

DianTama · January 2021

Cool! good job on what you do.
cant wait to finish mine

Xenic · January 2021

Looks really cool, nice work dude

Mason · January 2021

Dope, looks great! Thanks for sharing.

Feature request: stack multiple monitors into a group of sorts rather than one continuous list.

Freek · January 2021

Looks nice! Any plans for a Docker version? And perhaps notifications via email, telegram etc or an old skool RSS feed?

Ympker · January 2021

Looking nice. Thanks!

ferri · January 2021

Never knew bout rqlite. Thanks

Also thanks for your project.

Neoon · January 2021

@Mason said:
Dope, looks great! Thanks for sharing.

Feature request: stack multiple monitors into a group of sorts rather than one continuous list.

I added groups, check out the updated version: https://statibus.x8e.net/
Kinda essential so added.

@Freek said:
Looks nice! Any plans for a Docker version? And perhaps notifications via email, telegram etc or an old skool RSS feed?

I am not a docker friend, if you want to make a docker version you can do that for sure.
Basic email notifications for the webmaster are planned yea but not such as subscribe for outages.

Maybe even a rss or json feed for the public.

ehab · January 2021

@Neoon said:
I am not a docker friend,

Neoon · January 2021

@ehab said:

@Neoon said:
I am not a docker friend,

ehab · January 2021

ok ok i will shut up

yoursunny · January 2021

Looks nice. I'll try to deploy one.

@Neoon said:
Supports Ping, Port and HTTP checks with custom http codes + 60s or 30s check intervals.

UptimeRobot has keyword check that I often use. It retrieves a URI, and alerts if the response contains / does not contain a particular string.

Neoon · January 2021

@yoursunny said:
Looks nice. I'll try to deploy one.

@Neoon said:
Supports Ping, Port and HTTP checks with custom http codes + 60s or 30s check intervals.

UptimeRobot has keyword check that I often use. It retrieves a URI, and alerts if the response contains / does not contain a particular string.

Sounds easy but what do you do, when the said page is down? Also trigger an alert?

yoursunny · January 2021

@Neoon said:

@yoursunny said:
Looks nice. I'll try to deploy one.

@Neoon said:
Supports Ping, Port and HTTP checks with custom http codes + 60s or 30s check intervals.

UptimeRobot has keyword check that I often use. It retrieves a URI, and alerts if the response contains / does not contain a particular string.

Sounds easy but what do you do, when the said page is down? Also trigger an alert?

UptimeRobot would also trigger an alert when the URI is not retrievable (connection timeout).
I use this feature to monitor NDN forwarder status pages. For example, https://savi.testbed.named-data.net (it's an XML document with XSLT) would contain the string "/yoursunny/pushups" if at least one of my repository replicas is connected, so I configure a keyword monitor to tell me when the string disappears.

Neoon · January 2021

@yoursunny said:

@Neoon said:

@yoursunny said:
Looks nice. I'll try to deploy one.

@Neoon said:
Supports Ping, Port and HTTP checks with custom http codes + 60s or 30s check intervals.

UptimeRobot has keyword check that I often use. It retrieves a URI, and alerts if the response contains / does not contain a particular string.

Sounds easy but what do you do, when the said page is down? Also trigger an alert?

UptimeRobot would also trigger an alert when the URI is not retrievable (connection timeout).
I use this feature to monitor NDN forwarder status pages. For example, https://savi.testbed.named-data.net (it's an XML document with XSLT) would contain the string "/yoursunny/pushups" if at least one of my repository replicas is connected, so I configure a keyword monitor to tell me when the string disappears.

I added it, currently in experimental branch, which the demo is running on.
https://github.com/Ne00n/statibus/tree/experimental
Works basically this way:

php cli.php service add 1 Website http https://www.worldometers.info/coronavirus/ 2 200 corona

no timeout + status code or list of status codes need to match and your keyword if you specify it.

Neoon · January 2021

Small update, a few bug fixes + css fixes for mobile including db init.
Will add a rss feed later and external checks also some CI, which is needed.

Freek · January 2021

@Freek said:
Looks nice! Any plans for a Docker version? And perhaps notifications via email, telegram etc or an old skool RSS feed?

I am not a docker friend, if you want to make a docker version you can do that for sure.
Basic email notifications for the webmaster are planned yea but not such as subscribe for outages.

Maybe even a rss or json feed for the public.

Alright, I put it on my to-do list

MichaelCee · January 2021

Good design. Nice and compact. My current one thinks it's a good idea to have the page scroll and scroll and scroll but I like the data for each server being on the same line. Good job.

vish · January 2021

Kudos on another quality project Neoon

yoursunny · January 2021

I got it installed in two Docker containers. It seems that the cron/uptime.php requires bcmath extension, which is not in the official php:7-alpine image but can be added.
I don't have a Dockerfile yet - I just typed the commands one by one.

I hope cli.php group list and cli.php service list commands can output in JSON format instead of print_r format, so that I can automate the setup using jq.
Alternatively, cli.php group delete and cli.php service add and cli.php service delete commands should accept names in place of IDs.

Neoon · January 2021

@yoursunny said:
I got it installed in two Docker containers. It seems that the cron/uptime.php requires bcmath extension, which is not in the official php:7-alpine image but can be added.
I don't have a Dockerfile yet - I just typed the commands one by one.

Yea the alpine image is a bitch.

I hope cli.php group list and cli.php service list commands can output in JSON format instead of print_r format, so that I can automate the setup using jq.

Well yeah I could change it to output json, should be no problem since its readable too.

Alternatively, cli.php group delete and cli.php service add and cli.php service delete commands should accept names in place of IDs.

The ID's are unique, the names are not, so doing that would be suicidal.
Also the ID's are used for JOINS, I cannot remove them however, I would put out a sql migration to make the names UNIQUE.

Just to be on the safe side so this would be possible, should be easier to use by then.

Freek · January 2021

@yoursunny said:

I got it installed in two Docker containers. It seems that the cron/uptime.php requires bcmath extension, which is not in the official php:7-alpine image but can be added.
I don't have a Dockerfile yet - I just typed the commands one by one.

I hope cli.php group list and cli.php service list commands can output in JSON format instead of print_r format, so that I can automate the setup using jq.
Alternatively, cli.php group delete and cli.php service add and cli.php service delete commands should accept names in place of IDs.

Are you interested in collaborating to create a Docker image for this?

Personally I'm not a fan of alpine images because it doesn't use musl. This page sums it up pretty nicely, but of course it depends on your use case; https://pythonspeed.com/articles/alpine-docker-python/

ehab · January 2021

those who complain about alpone image then you can use

debian:buster-slim

TheDP · January 2021

Neoon · January 2021

Update:

RSS Feed
Groups and Services can be deleted by name
Added CI Tests, to improve code quality, PHP 8 looks fine
Check if bcmath and curl extension exists if not throws an error
list returns a json response
some code + css optimizations

yoursunny · January 2021

@Neoon said:

Groups and Services can be deleted by name

list returns a json response

Great.

Added CI Tests, to improve code quality, PHP 8 looks fine

DYK Travis CI is no longer free?
If you aren't paying $69/month, you'd better move to GitHub Actions or CircleCI.

SQL injection everywhere!
You need Parameterized Statements (since rqlite v5.5.0).
And no, having a regex is insufficient.

https://github.com/Ne00n/statibus/blob/945d447851f3d6509aca78730b381c116406b8fa/class/statibus.php#L21

$response = $this->rqlite->select('SELECT id FROM groups WHERE name="'.$params[3].'"',True);

https://github.com/Ne00n/statibus/blob/945d447851f3d6509aca78730b381c116406b8fa/content/service.php#L9

$data = $statibus->sql()->select('SELECT * FROM services JOIN uptime ON uptime.serviceID=services.id WHERE services.id='.$serviceID.' ',True);

Neoon · January 2021

@yoursunny said:

@Neoon said:

Groups and Services can be deleted by name

list returns a json response

Great.

Added CI Tests, to improve code quality, PHP 8 looks fine

DYK Travis CI is no longer free?
If you aren't paying $69/month, you'd better move to GitHub Actions or CircleCI.

They have a free Plan, works for me.
Migration from .org is still going on, so I expect it to use OOS credits by then.

SQL injection everywhere!

No, cli.php is only available to your locally, means only you have access to these commands.
Additional, every SQL query runs through SQLite3::escapeString.

You need Parameterized Statements (since rqlite v5.5.0).

Thanks for letting me know, I will update the class.
Since this class has been written 1+ year ago, Parameterized Statements where not implemented by rqlite.

yoursunny · January 2021

DYK Travis CI is no longer free?
If you aren't paying $69/month, you'd better move to GitHub Actions or CircleCI.

They have a free Plan, works for me.
Migration from .org is still going on, so I expect it to use OOS credits by then.

Travis free plan turns out to be 10000 credits one time. When you run out, it'll never be replenished.
As for OOS credits, you'll have to haggle with support every time you need more credits. It's not recurring.

SQL injection everywhere!

No, cli.php is only available to your locally, means only you have access to these commands.
Additional, every SQL query runs through SQLite3::escapeString.

What if my group name happen to contain a quotation sign?
"idle" servers isn't too crazy, where "idle" needs quotation if the servers are only partially idle.

Since this class has been written 1+ year ago, Parameterized Statements where not implemented by rqlite.

?

Hxxx · January 2021

I was about to mention the SQL injections issue. Glad @yoursunny went ahead .

At least there is a preg match on services.

Cool stuff @Neoon , thanks for contributing to the community with your projects. You tend to do nice useful stuff.

statibus | Minimalistic Status Page

Comments

This Site is currently in maintenance mode.
Please check back here later.

statibus | Minimalistic Status Page

Comments

This Site is currently in maintenance mode.Please check back here later.

This Site is currently in maintenance mode.
Please check back here later.