SagnikS
SagnikS
Comments
-
Heya, we can offer this in Germany. If you're still looking for something, feel free to PM me and we can discuss your specific requirements.
-
Ah I see. Interesting choice. Not sure why they just don't run things standalone. They're probably not very experienced with Proxmox I'm assuming (going by how they claim it's unreliable etc.)
-
I wonder what they're migrating to...
-
I'm not sure what you're referring to by LVM's self healing :sweat_smile:. I'm referring to BTRFS's stability, A few weeks back I had a friend lose data due to a power loss (OpenSUSE + Btrfs). This rarely happens with EXT4. And yes, not sure where that RAM requirement came from. I run a few large (100+TB) Proxmox servers…
-
We can cap it on our side too if you want to fully utilize it 24x7. If you'd like to test out a trial, feel free to shoot me a PM.
-
Heya, would these interest you? https://my.zadeservers.net/cart.php?gid=14. The cores are 50% dedicated (for ex., you can use upto 200% CPU consistently on a 4vCore plan).
-
LVM RAID uses the same underlying driver iirc, btrfs is still not stable and ZFS has a performance overhead/you need to tune it properly. mdadm still works just fine ootb and is a tested solution.
-
Got an alert from our monitoring software, and an email too. cat /proc/mdstat will also show your array as degraded.
-
You should get the NVMe that was removed from the array replaced ASAP. I had that happen too and put it back in the RAID array because a badblocks and SMART test came out clean. A few hours later, the node started behaving extremely weirdly (high iowait) and eventually crashed.
-
Heya, would Germany work for you by any chance? :smile:
-
I use a similar setup and use DHCP to hand out IPs and gateway. When installing from ISO, the Debian installer just refuses to work, doesn't like the gateway being out of the subnet, Ubuntu's new installer, Anaconda, Windows work just fine. Ubuntu's old installer refused the DHCP offer.
-
Is it alright if I DM you? I should be able to offer you something :)
-
Is the 150GB storage requirement a must, or would a bit less (110GB~) work?
-
Haven't they started charging like $500/m because of abuse? :pensive:
-
If you're willing to play around a bit with CF Workers, you can get it done pretty nicely (you can almost achieve anything you want). Here's an example you can get started with: https://community.cloudflare.com/t/geographic-routing-and-load-balancing-with-cloudflare-workers/21900
-
You can check out PrivateBin.
-
Virtualmin doesn't scale up well, at all. And it has a bunch of inconsistencies which pretty much make it unusable for large scale production usage.
-
cb2d0e9b3fde8e5a821a9c246ff3bd0c Thank you very much :)
-
Was that on Hetzner, or somewhere else?
-
What location is it?
-
Great suggestons, voted, hope it will be implemented by the time we discover alien life :grin:
-
Reseller Access Level -> Manage Tickets -> Ticket System Settings -> Ticket System Enabled checkbox
-
Server transferred to @Ndha.
-
Let's discuss about it in DMs :smile:
-
For example, if you order a server on the 10th, and your account billing date is the 1st, you get charged on the 1st for the duration between the 10th of the first month to the 10th of the next month. You can't pay for the server in the time gap between the start of billing period of the server, and the invoice generation…
-
No, this month. Hetzner bills on a fixed day every month. These were paid till the 21st and 24th of this month.
-
Try this: #Port Forwarding Rules iptables -t nat -A PREROUTING -p tcp --dport 1234 -j DNAT --to-destination 192.168.1.2:22 iptables -t nat -A POSTROUTING -p tcp --sport 22 -s 192.168.1.2 -j SNAT --to-source <public_ip>:1234 Whups, looks like you have the exact same config. It should just work, make sure that there's…
-
Whoops, I mean, ping the IP from the VM. That same IP should also be the gateway for the network config inside the VM.
-
If it didn't work, try pinging the IP that's assigned to the bridge.
-
That's what I do at home too (except the second IP).
-
Just set the netmask and put in an IP from the internal subnet in the network config, and you should be golden.