No, for some good reasons :
1. Newly registered (5 months old).
2. No control panel, only SSH.
3. No IPMI.
4. Nulled WHMCS.
5. No english on main website, probably the support team can do basic english.
Testing *experimental* ARM-compatibility using a Raspberry Pi 3.
Disk speeds are very stronk! And I could have taken a nap during the Geekbench test. Kept getting under voltage warnings, so I'll have to find a different power adapter for it. Anyways aarch64 support is pretty much done, now need to work on aarch32/armv7 when I have some more time.
@Mason said:
Testing *experimental* ARM-compatibility using a Raspberry Pi 3.
Disk speeds are very stronk! And I could have taken a nap during the Geekbench test. Kept getting under voltage warnings, so I'll have to find a different power adapter for it. Anyways aarch64 support is pretty much done, now need to work on aarch32/armv7 when I have some more time.
@Mason said:
Testing *experimental* ARM-compatibility using a Raspberry Pi 3.
Disk speeds are very stronk! And I could have taken a nap during the Geekbench test. Kept getting under voltage warnings, so I'll have to find a different power adapter for it. Anyways aarch64 support is pretty much done, now need to work on aarch32/armv7 when I have some more time.
@cybertech said:
stardust configuration is fixed, i.e. no additional ram/CPU?
Yes. Stardust instances come in only one configuration. If you need more resources, you have to upgrade to their "DEV" instances. STARDUST1-S is like their DEV1-XS instance.
They say that each account can have a total of two Stardust instances, one each at their PAR1 and AMS1 regions.
It won't be wrong to say that this is their way of increasing signups (by offering cheapest entry-level VPS among major players). Hoping that some would upgrade to more costly DEV instances and/or use their other services.
@cybertech said:
stardust configuration is fixed, i.e. no additional ram/CPU?
Yes. Stardust instances come in only one configuration. If you need more resources, you have to upgrade to their "DEV" instances. STARDUST1-S is like their DEV1-XS instance.
They say that each account can have a total of two Stardust instances, one each at their PAR1 and AMS1 regions.
It won't be wrong to say that this is their way of increasing signups (by offering cheapest entry-level VPS among major players). Hoping that some would upgrade to more costly DEV instances and/or use their other services.
Depends, for some it says 2, for me it says 1.
It even says, a location is out of stock, which is the worst fake news I have ever seen.
You just grab the cli, and deploy via that, worked for me, while FR was out of stock.
I think it shows the same to everyone. It showed me 1/1 and 100% used when I only had 1 instance. But, did not stop me from creating another instance on a different location. Now, it's 2/1. ¯_(ツ)_/¯
Comments
iperf3 Network Speed Tests (IPv4): --------------------------------- Provider | Location (Link) | Send Speed | Recv Speed | | | Clouvider | London, UK (10G) | 1.28 Gbits/sec | 1.06 Gbits/sec Online.net | Paris, FR (10G) | 1.37 Gbits/sec | 1.13 Gbits/sec WorldStream | The Netherlands (10G) | 1.16 Gbits/sec | 1.15 Gbits/sec Biznet | Jakarta, Indonesia (1G) | 803 Mbits/sec | 39.2 Mbits/sec Clouvider | NYC, NY, US (10G) | 2.94 Gbits/sec | 1.55 Gbits/sec Velocity Online | Tallahassee, FL, US (10G) | 2.73 Gbits/sec | 1.94 Gbits/sec Clouvider | Los Angeles, CA, US (10G) | 7.00 Gbits/sec | 3.43 Gbits/sec Iveloz Telecom | Sao Paulo, BR (2G) | busy | busyI bench YABS 24/7/365 unless it's a leap year.
10TB in Los Angeles from HostHatch
VirMach - Buffalo - $12.48/Year.
Have you tried turning it off and on again?ViridWeb - Amsterdam - $6/Year.
Have you tried turning it off and on again?Nexril - Dallas - $15/Year.
Have you tried turning it off and on again?NanoKVM RO YABS (4 Cores, 2GB)
Keep in mind, Network is limited to 100Mbit/sec and Disk I/O to 100MB/sec
Free NAT KVM | Free NAT LXC
Dual E5-2620v2 from quickpacket. $40/month dedi.
I hope I can utilize its power soon.
microLXC micro, Johannesburg, South Africa
Free NAT KVM | Free NAT LXC
littlecreek north Carolina $3.50/mth
I bench YABS 24/7/365 unless it's a leap year.
Please do Geekbench 5 for this VPS
@sonic
network tested aren't accurate as I've just been limited to 6mbit/s :'(
I bench YABS 24/7/365 unless it's a leap year.
Oh that's good result enough, going to take 1
yeah I think the NVMe is good. looks like a 2680v3
I bench YABS 24/7/365 unless it's a leap year.
Which provider is that
? Nice exotic location!
LinuxFreek.com — Thank you for your attention to this matter
https://zappiehost.com/
Free NAT KVM | Free NAT LXC
WSL 2 on my Ryzen dedi
Speedtest results are pretty obvious since this dedi only have 1000Mbps port
NexusBytes Entry-3G
Sultan Muda - Amazon Store
Testing out Slackware in Frankfurt:
As I'd been updating templates, I thought I'd work towards adding a Slackware template too.
hostsolutions still working after few months:
I bench YABS 24/7/365 unless it's a leap year.
Local provider $28.75 dedi
Figured I had to grab one of Zappie Host's New Zealand KVMs
Website: thomassen.sh
Inception Hosting
Storage VPS
Phoenix AZ
I bench YABS 24/7/365 unless it's a leap year.
anynode $15/year promo
before it goes over to buyvm
I bench YABS 24/7/365 unless it's a leap year.
is the provider disclosable?
https://webhorizon.net
No, for some good reasons :
1. Newly registered (5 months old).
2. No control panel, only SSH.
3. No IPMI.
4. Nulled WHMCS.
5. No english on main website, probably the support team can do basic english.
If you want to look around, https://kakab.net
Update pushed to the YABS repo to incorporate the latest fio, iperf3, and Geekbench 5 releases.
Give me a shout if anyone has any issues to report.
yabs daddy
1.75$/month OpenVZ from dedipath.
It provides 2 IPv4 so I give it a try, then I feel it is slow.
Scaleway France Stardust, 1GB, 0.30€/m
Free NAT KVM | Free NAT LXC
Scaleway Netherland Stardust, 1GB, 0.30€/m (without IPv4)
Free NAT KVM | Free NAT LXC
how does it work out to be 0.30 monthly?
I bench YABS 24/7/365 unless it's a leap year.
Remove the IPv4 as I said above, VAT may apply so a few cents more.
Free NAT KVM | Free NAT LXC
Testing *experimental* ARM-compatibility using a Raspberry Pi 3.
Disk speeds are very stronk! And I could have taken a nap during the Geekbench test. Kept getting under voltage warnings, so I'll have to find a different power adapter for it. Anyways aarch64 support is pretty much done, now need to work on aarch32/armv7 when I have some more time.
yabs daddy
Free NAT KVM | Free NAT LXC
Link to order. Thanks.
Nexus Bytes Ryzen Powered NVMe VPS | NYC|Miami|LA|London|Netherlands| Singapore|Tokyo
Storage VPS | LiteSpeed Powered Web Hosting + SSH access | Switcher Special |
$5/lifetime, much prem
https://vortexnode.com/superdeals
yabs daddy
you really reminded me of that time.
Too much.
Nexus Bytes Ryzen Powered NVMe VPS | NYC|Miami|LA|London|Netherlands| Singapore|Tokyo
Storage VPS | LiteSpeed Powered Web Hosting + SSH access | Switcher Special |
Where is ARMYABS?
Free NAT KVM | Free NAT LXC
Coming soon to a repo near you
I have to clean it up a bit first and take it through a few more test runs, then it should be good to go.
yabs daddy
aliendata / dataideas
shared xeon storage vps $5 monthly
disk test with the 120gb ssd storage portion rather than the 20gb nvme boot
Scaleway STARDUST1-S (IPv6-only) Amsterdam - €0.37/m
Have you tried turning it off and on again?hmmm, you could add a experimental repo, could you right?
Free NAT KVM | Free NAT LXC
stardust configuration is fixed, i.e. no additional ram/CPU?
I bench YABS 24/7/365 unless it's a leap year.
Yes. Stardust instances come in only one configuration. If you need more resources, you have to upgrade to their "DEV" instances. STARDUST1-S is like their DEV1-XS instance.
They say that each account can have a total of two Stardust instances, one each at their PAR1 and AMS1 regions.
It won't be wrong to say that this is their way of increasing signups (by offering cheapest entry-level VPS among major players). Hoping that some would upgrade to more costly DEV instances and/or use their other services.
Have you tried turning it off and on again?Scaleway STARDUST1-S (IPv6-only) Paris - €0.37/m
Have you tried turning it off and on again?Depends, for some it says 2, for me it says 1.
It even says, a location is out of stock, which is the worst fake news I have ever seen.
You just grab the cli, and deploy via that, worked for me, while FR was out of stock.
Free NAT KVM | Free NAT LXC
Free NAT KVM | Free NAT LXC
Will put the aarch64 stuff in there tonight. Armv7/aarch32 will come later
Scratch that, not happening tonight.
yabs daddy
I think it shows the same to everyone. It showed me 1/1 and 100% used when I only had 1 instance. But, did not stop me from creating another instance on a different location. Now, it's 2/1. ¯_(ツ)_/¯
Have you tried turning it off and on again?