It might be a little too late but maybe just edit and mention it in the OP that when posting YABS results, it would be good if members could include details such as the Provider, Plan, Location and Price ✌️
Other details like date of purchase can be included too or just indicate if it's a deal bought on a special occasion.
"The imitator dooms himself to hopeless mediocrity." — Ralph Waldo Emerson
@TheDP said:
It might be a little too late but maybe just edit and mention it in the OP that when posting YABS results, it would be good if members could include details such as the Provider, Plan, Location and Price ✌️
Other details like date of purchase can be included too or just indicate if it's a deal bought on a special occasion.
if you would be so kind to make a format, I'll gladly put it up on OP. gonna remove the manual indexing since its gotten too far behind.
@TheDP said:
It might be a little too late but maybe just edit and mention it in the OP that when posting YABS results, it would be good if members could include details such as the Provider, Plan, Location and Price ✌️
Other details like date of purchase can be included too or just indicate if it's a deal bought on a special occasion.
if you would be so kind to make a format, I'll gladly put it up on OP. gonna remove the manual indexing since its gotten too far behind.
🥲
Check your PM
"The imitator dooms himself to hopeless mediocrity." — Ralph Waldo Emerson
@TheDP said:
It might be a little too late but maybe just edit and mention it in the OP that when posting YABS results, it would be good if members could include details such as the Provider, Plan, Location and Price ✌️
Other details like date of purchase can be included too or just indicate if it's a deal bought on a special occasion.
N5105 router with 4x 2.5GbE from aliexpress. I've installed 8GB Crucial DRAM and 480GB WD Green NVMe.
Only just got it and set up proxmox on it, so before even bothering setting up the virtualised pfSense install, I thought I'd set up a quick VM for testing yabs.
@rober7 said: @SpeedyPage still performing good even after a few weeks, usually i had problems with other providers, after 1-2 weeks the performance drops at 50%.
@ofit said:
Hello @ralf, can you please test wireguard and openvpn performance (speed) on pfsense and openwrt in promox on your new box n5105 please. Thanks
Wireguard is no longer supported on recent versions of pfsense, so I'm going to roll my own linux VM to share a route48.org amongst some other VMs on it. Obviously I won't be in much control of throughput on that, and it feels a bit like abuse for a free service.
I do have a wireguard proxy set up to another VM at OVH which seems to be working well, but not much use for a test as OVH is capped at 100Mbps. But was required as my ISP IP is changing every time I reboot the router, and I need a fixed IP for a corporate whitelisting. Also my home net is capped at 500Mbps too, so that'll be the upper limit. But I'll try out with a temporary wireguard route to another server in Europe or US when I get some time.
I've never used openvpn, and chose wireguard for all my systems as it seemed to be easier and better, so trying that will be really low priority as I'll probably need to be reading many docs for that!
Also openwrt, I'm not sure yet if I'll try it. Originally my plan was to give pfsense a quick test and then move to a linux based solution because I haven't used FreeBSD for about 20 years. However, pfsense worked really well and did everything I wanted off the bat, and I've since spent quite a bit of time setting up the routes as I want them. I may try a side-by-side openwrt test, but TBH as I used NIC pass-through, it depends on whether I can get away with stopping the pfsense VM and re-assigning the same NICs to another VM as long as only one is running at once. If proxmox doesn't let you do that, I'm less keen to change from pfsense as I'm happy with it so far.
Anyway, will let you know when I have some wireguard perf results.
@ofit said:
Hello @ralf, can you please test wireguard and openvpn performance (speed) on pfsense and openwrt in promox on your new box n5105 please. Thanks
I do have a wireguard proxy set up to another VM at OVH which seems to be working well, but not much use for a test as OVH is capped at 100Mbps.
So, initial tests using that (as it was already set up) seem pretty good for up to 100Mbps.
My direct setup is:
(unecrypted) laptop -> wifi -> 192.168.1.1 (pfsense) -> WAN -> internet -> gra.proof.ovh.net
I guess -R is slower because the ports on KS-LE-1 are 100 up, 1000 down.
CPU on proxmox hit about 6.5% on the first test and about 7.5% on the second, so not much impact. From the graph that shows all cores, running top -t 0.25 shows CPU getting up to about 30% (max 400%)
OneProvider.com
Product/Service: Dedicated Server +
Server location: Paris - FR
HARDWARE SPECIFICATIONS:
CPU: Intel Xeon E3-1220 v2 or better - 3.1 GHz - 4 core(s)
RAM: 32GB - DDR3
Hard Drive(s): 2x 1TB (SSD SATA)
Bandwidth: Unmetered @ 1Gbps (1 Gbps Guaranteed)
Price: €24.99 / 1 month
I got 2x SA530 3D NAND SATA SSD drives from Western Digital with Power On Hours: 120 , Intel Xeon E3-1230 V2 CPU and Dell Multi-bit ECC 4x 8GiB bus 1600 MT/s RAM.
@ofit said:
Hello @ralf, can you please test wireguard and openvpn performance (speed) on pfsense and openwrt in promox on your new box n5105 please. Thanks
I do have a wireguard proxy set up to another VM at OVH which seems to be working well, but not much use for a test as OVH is capped at 100Mbps.
So, initial tests using that (as it was already set up) seem pretty good for up to 100Mbps.
Apologies for not adding more info. I did a similar proxy to a US VPS with Racknerd in LA and run iperf directly on that machine. I was getting about 300Mbps direct but for some reason the forwarding to a VM that did wireguard and forwarded on to the RN machine seemed to top out at about 130Mbps. Not sure why yet why it was much lower throughput than unwrapped, as CPU usage seemed pretty low everywhere.
Comments
Greencloud EPYCSG-2:
SoYouStart / OVH
Basic System Information: --------------------------------- Uptime : 0 days, 0 hours, 8 minutes Processor : Intel(R) Xeon(R) CPU E3-1245 v5 @ 3.50GHz CPU cores : 8 @ 3500.000 MHz AES-NI : ✔ Enabled VM-x/AMD-V : ✔ Enabled RAM : 30.9 GiB Swap : 1024.0 MiB Disk : 446.3 GiB Distro : AlmaLinux 8.6 (Sky Tiger) Kernel : 4.18.0-372.13.1.el8_6.x86_64 fio Disk Speed Tests (Mixed R/W 50/50): --------------------------------- Block Size | 4k (IOPS) | 64k (IOPS) ------ | --- ---- | ---- ---- Read | 171.62 MB/s (42.9k) | 233.39 MB/s (3.6k) Write | 172.08 MB/s (43.0k) | 234.61 MB/s (3.6k) Total | 343.70 MB/s (85.9k) | 468.00 MB/s (7.3k) | | Block Size | 512k (IOPS) | 1m (IOPS) ------ | --- ---- | ---- ---- Read | 210.04 MB/s (410) | 209.34 MB/s (204) Write | 221.20 MB/s (432) | 223.28 MB/s (218) Total | 431.24 MB/s (842) | 432.62 MB/s (422) iperf3 Network Speed Tests (IPv4): --------------------------------- Provider | Location (Link) | Send Speed | Recv Speed | | | Clouvider | London, UK (10G) | 248 Mbits/sec | 941 Mbits/sec Online.net | Paris, FR (10G) | 248 Mbits/sec | 941 Mbits/sec Hybula | The Netherlands (40G) | 248 Mbits/sec | 940 Mbits/sec Uztelecom | Tashkent, UZ (10G) | 220 Mbits/sec | 739 Mbits/sec Clouvider | NYC, NY, US (10G) | 234 Mbits/sec | 896 Mbits/sec Clouvider | Dallas, TX, US (10G) | 67.0 Mbits/sec | 485 Mbits/sec Clouvider | Los Angeles, CA, US (10G) | 218 Mbits/sec | 837 Mbits/sec iperf3 Network Speed Tests (IPv6): --------------------------------- Provider | Location (Link) | Send Speed | Recv Speed | | | Clouvider | London, UK (10G) | 244 Mbits/sec | 928 Mbits/sec Online.net | Paris, FR (10G) | 244 Mbits/sec | 928 Mbits/sec Hybula | The Netherlands (40G) | 244 Mbits/sec | 926 Mbits/sec Uztelecom | Tashkent, UZ (10G) | 216 Mbits/sec | 799 Mbits/sec Clouvider | NYC, NY, US (10G) | 220 Mbits/sec | 883 Mbits/sec Clouvider | Dallas, TX, US (10G) | 227 Mbits/sec | 855 Mbits/sec Clouvider | Los Angeles, CA, US (10G) | 222 Mbits/sec | 844 Mbits/sec Geekbench 5 Benchmark Test: --------------------------------- Test | Value | Single Core | 1140 Multi Core | 4307Amadex • Hosting Forums • root.hr
WebHosting24 great and cheap deal in Miami
ServerStatus , slackvpn , linux mirrors
Recommended Providers: Servarica(aff) | HostBRR(aff) | SolidVPS(aff) | RackNerd(aff) | KuroIT(aff) | AlphaVPS(aff) | HostDare(aff)
Greencloud 4th of July special - $47/2y:
Spaceberg.cc - Your favorite Seedbox provider!
YABs without provider/plan/price
I agree, @LetMeBeSad is a repeat offender too.
ShockHosting SSD-KVM-2GB - NJ US - $29.99/year (4th of July Deal) ⚡
"The imitator dooms himself to hopeless mediocrity." — Ralph Waldo Emerson
I agree too and it is super annoying. Ban him from posting on this thread
It might be a little too late but maybe just edit and mention it in the OP that when posting YABS results, it would be good if members could include details such as the Provider, Plan, Location and Price ✌️
Other details like date of purchase can be included too or just indicate if it's a deal bought on a special occasion.
"The imitator dooms himself to hopeless mediocrity." — Ralph Waldo Emerson
@TheDP that sounds like a good idea
Ympker's VPN LTD Comparison, Uptime.is, Ympker's GitHub.
LMBS probably builds servers himself.
Have you tried turning it off and on again?Exactly. 90% comes from my personal builds. Plenty of them is located in local DC.
Spaceberg.cc - Your favorite Seedbox provider!
if you would be so kind to make a format, I'll gladly put it up on OP. gonna remove the manual indexing since its gotten too far behind.
🥲
I bench YABS 24/7/365 unless it's a leap year.
AWS r6g.medium, 30GB gp2 disk, us-west-2. No iperf tests, because AWS bandwidth is expensive
Virmach Ryzen Atlanta 7$/y
Free NAT KVM | Free NAT LXC
Check your PM
"The imitator dooms himself to hopeless mediocrity." — Ralph Waldo Emerson
10€/y NY WH24
Free NAT KVM | Free NAT LXC
Oracle free, time to do some SYS admin work now and install everything
Synteq Technical Support, Technical Writer.
Contact me at: +1 (307) 428 8111 or [email protected]
done, credits to @TheDP
I bench YABS 24/7/365 unless it's a leap year.
N5105 router with 4x 2.5GbE from aliexpress. I've installed 8GB Crucial DRAM and 480GB WD Green NVMe.
Only just got it and set up proxmox on it, so before even bothering setting up the virtualised pfSense install, I thought I'd set up a quick VM for testing yabs.
@SpeedyPage still performing good even after a few weeks, usually i had problems with other providers, after 1-2 weeks the performance drops at 50%.
`Basic System Information:
Uptime : 10 days, 22 hours, 35 minutes
Processor : AMD EPYC-Milan Processor
CPU cores : 2 @ 3693.060 MHz
AES-NI : ✔ Enabled
VM-x/AMD-V : ❌ Disabled
RAM : 3.8 GiB
Swap : 0.0 KiB
Disk : 58.1 GiB
Distro : Ubuntu 22.04 LTS
Kernel : 5.19.0-051900rc3-generic
fio Disk Speed Tests (Mixed R/W 50/50):
iperf3 Network Speed Tests (IPv4):
Provider | Location (Link) | Send Speed | Recv Speed
| | |
Clouvider | London, UK (10G) | 784 Mbits/sec | 632 Mbits/sec
Online.net | Paris, FR (10G) | 793 Mbits/sec | 836 Mbits/sec
Clouvider | NYC, NY, US (10G) | 922 Mbits/sec | 881 Mbits/sec
Geekbench 5 Benchmark Test:
Test | Value
|
Single Core | 1375
Multi Core | 2585
Full Test | https://browser.geekbench.com/v5/cpu/15871043
`
Wrap that in code pls
Synteq Technical Support, Technical Writer.
Contact me at: +1 (307) 428 8111 or [email protected]
Hello @ralf, can you please test wireguard and openvpn performance (speed) on pfsense and openwrt in promox on your new box n5105 please. Thanks
Wireguard is no longer supported on recent versions of pfsense, so I'm going to roll my own linux VM to share a route48.org amongst some other VMs on it. Obviously I won't be in much control of throughput on that, and it feels a bit like abuse for a free service.
I do have a wireguard proxy set up to another VM at OVH which seems to be working well, but not much use for a test as OVH is capped at 100Mbps. But was required as my ISP IP is changing every time I reboot the router, and I need a fixed IP for a corporate whitelisting. Also my home net is capped at 500Mbps too, so that'll be the upper limit. But I'll try out with a temporary wireguard route to another server in Europe or US when I get some time.
I've never used openvpn, and chose wireguard for all my systems as it seemed to be easier and better, so trying that will be really low priority as I'll probably need to be reading many docs for that!
Also openwrt, I'm not sure yet if I'll try it. Originally my plan was to give pfsense a quick test and then move to a linux based solution because I haven't used FreeBSD for about 20 years. However, pfsense worked really well and did everything I wanted off the bat, and I've since spent quite a bit of time setting up the routes as I want them. I may try a side-by-side openwrt test, but TBH as I used NIC pass-through, it depends on whether I can get away with stopping the pfsense VM and re-assigning the same NICs to another VM as long as only one is running at once. If proxmox doesn't let you do that, I'm less keen to change from pfsense as I'm happy with it so far.
Anyway, will let you know when I have some wireguard perf results.
Virmach- AMS (FFxxx?) with Ryzen - after migration.
was from BF 2021. at USD 11/year- maybe I will renew??
Thu 07 Jul 2022 09:44:52 PM EDT Basic System Information: --------------------------------- Uptime : 0 days, 0 hours, 20 minutes Processor : AMD Ryzen 9 5900X 12-Core Processor CPU cores : 1 @ 3692.348 MHz AES-NI : ✔ Enabled VM-x/AMD-V : ✔ Enabled RAM : 1.1 GiB Swap : 256.0 MiB Disk : 24.3 GiB Distro : Debian GNU/Linux 11 (bullseye) Kernel : 5.10.0-11-amd64 fio Disk Speed Tests (Mixed R/W 50/50): --------------------------------- Block Size | 4k (IOPS) | 64k (IOPS) ------ | --- ---- | ---- ---- Read | 296.99 MB/s (74.2k) | 746.21 MB/s (11.6k) Write | 297.77 MB/s (74.4k) | 750.14 MB/s (11.7k) Total | 594.76 MB/s (148.6k) | 1.49 GB/s (23.3k) | | Block Size | 512k (IOPS) | 1m (IOPS) ------ | --- ---- | ---- ---- Read | 1.20 GB/s (2.3k) | 1.36 GB/s (1.3k) Write | 1.26 GB/s (2.4k) | 1.45 GB/s (1.4k) Total | 2.47 GB/s (4.8k) | 2.82 GB/s (2.7k) iperf3 Network Speed Tests (IPv4): --------------------------------- Provider | Location (Link) | Send Speed | Recv Speed | | | Clouvider | London, UK (10G) | 936 Mbits/sec | 937 Mbits/sec Online.net | Paris, FR (10G) | busy | 937 Mbits/sec Hybula | The Netherlands (40G) | 939 Mbits/sec | 937 Mbits/sec Uztelecom | Tashkent, UZ (10G) | 880 Mbits/sec | 721 Mbits/sec Clouvider | NYC, NY, US (10G) | 871 Mbits/sec | 740 Mbits/sec Clouvider | Dallas, TX, US (10G) | 535 Mbits/sec | 206 Mbits/sec Clouvider | Los Angeles, CA, US (10G) | 779 Mbits/sec | 647 Mbits/sec Geekbench 5 Benchmark Test: --------------------------------- Test | Value | Single Core | 1271 Multi Core | 1398 Full Test | https://browser.geekbench.com/v5/cpu/15885749blog archives
crowncloud 12th gen I9 frankfurt , 22$ per month . respectable performance , truly the Ultimate Processing Power
Webhosting24 - 20x22 - Munich DE - €22/year (New Year Special)
"The imitator dooms himself to hopeless mediocrity." — Ralph Waldo Emerson
deinserverhost root server 17.4 euro
ran geekbench 5 separately
https://browser.geekbench.com/v5/cpu/15886709
Holy shit that CPU steal is high af
Synteq Technical Support, Technical Writer.
Contact me at: +1 (307) 428 8111 or [email protected]
So, initial tests using that (as it was already set up) seem pretty good for up to 100Mbps.
My direct setup is:
My test set up using the tunnel is:
Doing a direct test first shows the wifi doesn't really limit bandwidth:
And multiple runs via the tunnel pretty much hit my usual speeds with OVH:
I guess -R is slower because the ports on KS-LE-1 are 100 up, 1000 down.
CPU on proxmox hit about 6.5% on the first test and about 7.5% on the second, so not much impact. From the graph that shows all cores, running top -t 0.25 shows CPU getting up to about 30% (max 400%)
For comparison, iperf direct from the KS-LE-1:
Just fresh Delivered
10€/y Miami W24
Free NAT KVM | Free NAT LXC
Steam Deck 256GB NVMe (not plugged in)
I am a representative of Advin Servers
Steam Deck 256GB NVMe (plugged in)
I am a representative of Advin Servers
Aliababa Cloud Offer 2GB KVM for 2.50$ 6Mbit Cap, 1.5TB Hong Kong
Free NAT KVM | Free NAT LXC
15$/y AMS GreenCloud from 4th April Sale, still in Stock.
Free NAT KVM | Free NAT LXC
OneProvider.com
Product/Service: Dedicated Server +
Server location: Paris - FR
HARDWARE SPECIFICATIONS:
CPU: Intel Xeon E3-1220 v2 or better - 3.1 GHz - 4 core(s)
RAM: 32GB - DDR3
Hard Drive(s): 2x 1TB (SSD SATA)
Bandwidth: Unmetered @ 1Gbps (1 Gbps Guaranteed)
Price: €24.99 / 1 month
I got 2x SA530 3D NAND SATA SSD drives from Western Digital with Power On Hours: 120 , Intel Xeon E3-1230 V2 CPU and Dell Multi-bit ECC 4x 8GiB bus 1600 MT/s RAM.
Yabs is here:
https://dttech.top - Personal Site.
Hetzner CPX21
Thu Jul 14 05:31:20 AM UTC 2022
Basic System Information:
Uptime : 0 days, 0 hours, 3 minutes
Processor : AMD EPYC Processor
CPU cores : 3 @ 2445.406 MHz
AES-NI : ✔ Enabled
VM-x/AMD-V : ❌ Disabled
RAM : 3.7 GiB
Swap : 0.0 KiB
Disk : 75.1 GiB
Distro : Ubuntu 22.04 LTS
Kernel : 5.15.0-40-generic
fio Disk Speed Tests (Mixed R/W 50/50):
Geekbench 5 Benchmark Test:
Test | Value
|
Single Core | 909
Multi Core | 2580
Full Test | https://browser.geekbench.com/v5/cpu/16001884
Oracle Cloud Ashburn, Virginia
Contribute your idling VPS/dedi (link), Android (link) or iOS (link) devices to medical research
Apologies for not adding more info. I did a similar proxy to a US VPS with Racknerd in LA and run iperf directly on that machine. I was getting about 300Mbps direct but for some reason the forwarding to a VM that did wireguard and forwarded on to the RN machine seemed to top out at about 130Mbps. Not sure why yet why it was much lower throughput than unwrapped, as CPU usage seemed pretty low everywhere.
FiberVM - Linux Cloud VPS S - Singapore
Virmach $6/yr plan from 2017 that was migrated (Dallas):
Virmach $6/yr plan from 2017 that was migrated (New York):
>
New / sub brand of Cloud V?
blog archives
Was able to access my Hostcram VPS after a long time (long story, too). So, posting a YABS - 6 months later.
Sun Jul 17 00:14:15 UTC 2022 Basic System Information: --------------------------------- Uptime : 17 days, 12 hours, 26 minutes Processor : 11th Gen Intel(R) Core(TM) i9-11900K @ 3.50GHz CPU cores : 1 @ 3500.000 MHz AES-NI : ✔ Enabled VM-x/AMD-V : ✔ Enabled RAM : 1.0 GiB Swap : 1.5 GiB Disk : 9.7 GiB Distro : Ubuntu 18.04.6 LTS Kernel : 5.13.19-6-pve fio Disk Speed Tests (Mixed R/W 50/50): --------------------------------- Block Size | 4k (IOPS) | 64k (IOPS) ------ | --- ---- | ---- ---- Read | 1.25 GB/s (313.7k) | 3.01 GB/s (47.1k) Write | 1.25 GB/s (314.5k) | 3.03 GB/s (47.4k) Total | 2.51 GB/s (628.2k) | 6.05 GB/s (94.5k) | | Block Size | 512k (IOPS) | 1m (IOPS) ------ | --- ---- | ---- ---- Read | 2.61 GB/s (5.1k) | 1.25 MB/s (1) Write | 2.75 GB/s (5.3k) | 1.58 MB/s (1) Total | 5.37 GB/s (10.4k) | 2.84 MB/s (2) iperf3 Network Speed Tests (IPv4): --------------------------------- Provider | Location (Link) | Send Speed | Recv Speed | | | Clouvider | London, UK (10G) | 86.6 Mbits/sec | 71.6 Mbits/sec Online.net | Paris, FR (10G) | 85.6 Mbits/sec | 69.6 Mbits/sec Hybula | The Netherlands (40G) | 86.6 Mbits/sec | 85.8 Mbits/sec Uztelecom | Tashkent, UZ (10G) | 82.5 Mbits/sec | 53.7 Mbits/sec Clouvider | NYC, NY, US (10G) | 89.4 Mbits/sec | 85.6 Mbits/sec Clouvider | Dallas, TX, US (10G) | 85.8 Mbits/sec | 63.6 Mbits/sec Clouvider | Los Angeles, CA, US (10G) | 89.6 Mbits/sec | 86.8 Mbits/sec Geekbench 4 Benchmark Test: --------------------------------- Test | Value | Single Core | 6803 Multi Core | 6836 Full Test | https://browser.geekbench.com/v4/cpu/16586715 Geekbench 5 Benchmark Test: --------------------------------- Test | Value | Single Core | 1590 Multi Core | 1561 Full Test | https://browser.geekbench.com/v5/cpu/16057115blog archives
Hi @vyas ,
Do you know why the Network speed is limited to less than 90 Mbits/sec?
https://dttech.top - Personal Site.
Spaceberg.cc - Your favorite Seedbox provider!
virmach after fixing their network in tokyo
I bench YABS 24/7/365 unless it's a leap year.
iHostART VPS FluxNode
We accept Karma donations for the last flan. 🍮 affbrr
NexusBytes $16/y vps